Kenwood KDC-C519FM Manual De Instrucciones página 20

Troubleshooting guide
The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
01 E: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
]
Load the disc magazine properly.
02 E: No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
04 E: No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
]
Clean the CD and load it correctly.
77 E: The unit is malfunctioning for some reason.
]
Press the reset button on the unit. If the "77E" code does not disappear, consult your nearest service center.
99 E: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
]
Check the disc magazine. And then, press the reset button on the unit.
If the "99E" code does not disappear, consult your nearest service center.
0d E: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation.
]
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will
start playing again.
— 20 —