Publicidad
Idiomas disponibles
Idiomas disponibles
Disconnect the tool from its battery pack when not in use, before servicing and when changing accessories such
as blades.
9. Avoid unintentional starting
Do not carry the tool with a finger on the switch.
10. Stay alert
Watch what you are doing. Use common sense. Do not operate the tool when you are tired.
11. Warning
The use of any accessory or attachment, other than recommended in this instruction manual, may present a risk
of personal injury.
Ensure that the battery pack is correct for the tool.
Ensure that the outside surface of battery pack or tool is clean and dry before plugging into charger.
Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect use may
result in a risk of electric shock, overheating or leakage of corrosive liquid from the battery.
12. Have your tool repaired by a qualified person
This tool is constructed in accordance with the relevant safety requirements. Qualified persons using original spare
parts should only carry out repairs; otherwise this may result in considerable danger to the user.
13. Disposal of battery
Ensure battery is disposed of safety as instructed by the manufacturer.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER
●
1. Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using
battery pack.
2. DANGER: 230 volts present at charging terminals. Do not probe with conductive objects. Danger of electric shock
or electrocution.
3. The charger and battery are specifically designed to work together. DO NOT attempt to charge the battery with
any chargers other than the ones in this manual.
4. Do not expose charger to rain or snow.
5. This charger is not intended for any uses other than charging rechargeable batteries. Any other uses may result in
risk of fire, electric shock or electrocution.
6. To reduce risk of damage to electric plug and cord, disconnect from mains socket by pulling the plug rather than
the cord.
7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or
stress.
8. The charger is ventilated through slots in the top and the bottom of the housing. Do not place any object on top
of charger or on a surface that might block the ventilation slots and result in excessive internal heat. Place the
charger in position away from any heat source.
9. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way.
10. Do not disassemble charger. Take it to authorized service center when service or repair is required. Incorrect
reassemble may result in a risk of electric shock, electrocution or fire.
11. To reduce risk of electric shock, unplug charger from outlet before attempting any cleaning. Removing the
battery pack will not reduce this risk.
12. Never attempt to connect 2 chargers together.
13. DO NOT store or use the tool in locations where the temperature may reach or exceed 105°F (such as outside
sheds or metal buildings in summer).
14. The charger is designed to operate on standard household electrical power (230volts). Do not attempt to use it
on any other voltage!
8
Publicidad
