Bosch Professional GWS 750 Manual Original página 18

OBJ_BUCH-2565-001.book Page 19 Monday, November 2, 2015 2:38 PM
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary
handle
– with standard-auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Kickback stop
Restarting Protection
Reduced starting current
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary
handle
– with standard-auxiliary handle
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
2
Surface grinding: a =6.5 m/s , K=1.5 m/s
h
2
Disk sanding: a =3.5 m/s , K=1.5 m/s
h
Bosch Power Tools
GWS... 700
0 601 ... 394 0..
W 700
W 355
-1
min 11000
-1
min –
mm 115
M 14
mm 22
–

–
kg 1.9
kg 1.8
/II
GWS... 750 750-100 750-100 I
0 601 ... 394 00. 394 0..
W 750
W 380
-1
min 11000 11000
-1
min –
mm 125
M 14 M 10
mm 22
–

–
kg 1.9
kg 1.8
/II
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
2
,
2
.
700 710
394 0.. 394 0.. 394 0..
700 710
355 355
11000 11000 11000
– –
125 115
M 14 M 14 M 14
22 22
– –
 
– –
1.9 1.9
1.8 1.8
/II /II
750-125 750-125
394 2.. 394 0B. 394 04.
750 750 750
380 380 380
11000 11000
– – –
100 100 125
M 10 M 10
22 22 22

– –

– –

– –
1.9 1.9 1.9
1.8 1.8 1.8
/II /II /II
1 609 92A 1CR | (2.11.15)
English | 19
710 750
394 0..
750 750
380 380
11000
– –
125 115
M 14
22 22
– –

–
– –
1.9 1.9
1.8 1.8
/II /II
750-125
394 05.
750 750
380 380
11000 11000
– –
125 125
M 14 M 10
22 22
– –
– –
– –
1.9 1.9
1.8 1.8
/II /II