SENSIC SA-10 Manual Del Usuario página 6

Step 1
Take the table clamp out of the box, attach
it to a table and twist the knob.
Step 3
Slide the boom
arm into the
table clamp.
Twist the knob
arm position.
Step 4a option 1:
Attach the microphone straight to the
end of the boom arm.
Assembly instructions
1
Step 2
Take the boom arm out of the box. Make
sure to hold the boom arm together
before removing the caution label and the
zip tie. Slowly loosen your grip on the
boom arm to prevent the boom arm from
shooting up.
2
Step 4b option 2:
Attach the 5/8" screw on the boom arm
and shock mounts.
3