Volpi KV100 Manual Del Usuario página 40

the dealer together with the machine. If these documents are missing the machine will be considered
out of warranty.
21 Trouble shooting and repair
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Issue
Pruners doesn't work
Blade becomes hot
Bad cutting surface
Can't charging, red LED
flash
40
Possible cause
Incorrect connection
Switch fail
Blunt blade
Damaged blade
Insufficient lubrication
Friction force added
Blade is dirty
Blunt blade
Incorrect usage of the
pruner
Battery charge is low
Battery not correctly insert
in the charger
Charger not correctly
connected to power
Battery poles are dirty
Battery failure
Charger fail
Solution
Check correct
connection with the tool
and the battery.
Check the switch to be in
ON position.
Send shear to service
center for repairing
Sharp or replace blade
Sharp or replace blade
Lubricate the blade
Lubricate the blade
Clean blade
Sharp or replace blade
Read instruction carefully
Charge the battery
Re-insert the battery to
charger
Re-connect the charger
Clean the poles
Replace battery
Replace charger
wire