Descargar Imprimir esta página

Garant 654410 Manual De Instrucciones página 27

Aparato de comprobación del par de giro electrónico hct

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 290
7.
Installation
WARNING
Failure of the mounting
Lacerations and impacts due to sudden loss of restraint during testing, resulting in uncontrolled violent movements of all
components.
»
Mount the torque analyser only on a platform that is sufficiently stable.
»
Mount the torque analyser as specified in the installation instructions.
Bolt the torque analyser into position on a suitable underlay with sufficient load-bearing capability in accordance with the
following specifications:
4 M10 hex socket-head screws to DIN EN ISO 4762, strength class min. 8.8.
4 plain washers.
4 M10 hexagon nuts.
Tightening torque 50 Nm.
8.
Initial commissioning
NOTICE
Incorrect mains voltage
System defect due to use with an incorrect mains voltage.
»
Operate the unit only with the mains voltage specified on the nameplate.
»
Use only the power supply unit supplied.
1. Variant 1: Connect the power supply unit to the mains.
Variant 2: Insert the USB-A plug into a computer.
2. Insert the USB-C plug into the connector socket on the exterior of the casing.
9.
Switching the torque tester on
i
The torque tester is tared automatically each time it is switched on.
1. To switch the torque tester on, press the OK button and keep it depressed for around three seconds.
»
"Tare" is displayed.
CAUTION! Incorrect taring. Do not apply any load to the torque tester during the taring process.
2. When the torque tester switches to measurement mode, the taring process is complete.
»
The measurement mode last used is displayed.
10. HCT Mobile App and HCT Windows App
i
Using the HCT App, data from the measurement tool is displayed on the end device and can be documented digitally. Meas-
urement tool and end device must be connected via Bluetooth.
HCT Mobile App for iOS
HCT-App for Windows
ho7.eu/win-app-hct
11. Menu navigation
Mode
History
Test case
Connections (only 654410)
HCT Mobile App for Android
Setting the mode [} Page 28]
Managing history [} Page 28]
Managing test cases [} Page 28]
Managing connections (only 654410) [} Page 29]
www.hoffmann-group.com
de
en
bg
da
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
27

Publicidad

loading

Este manual también es adecuado para:

654413