Garant 654410 Manual De Instrucciones página 30

GARANT Electronic Torque Tester HCT
de
ü Connection to HCT app is established.
1. Start the HCT app.
2. Search for devices in the app.
en
» Nearby Bluetooth devices are displayed.
3. Select the device (HCT-TT...).
bg
» Torque tester connected to the app.
11.4.2. Connecting to a computer using a USB cable
1. Connect USB-C plug with socket on torque tester.
da
2. Connect the USB plug to the USB interface on your computer.
11.5. MANAGING SETTINGS
ü The device is showing the start screen.
fi
1. Press right function button (5), enter password if necessary and confirm with OK (8).
2. Select "Settings" and confirm with OK (8).
fr 11.5.1. Display
C
it NOTICE! The date and time are synchronised as long as the torque tester is connected to the power supply. If
the torque tester is disconnected from the power supply for more than 6 minutes, the date and time must be
checked when it is next switched on and re-entered. The date and time can be automatically synchronised by
hr
connecting to the HCT Mobile app or HCT Windows app.
1. Select "Display" and confirm with OK (8).
2. The following settings can be configured:
lt
Brightness
Standby
nl
Dimming
Time format
no
Date
Time
pl
Date and time input
Back to Menu navigation [} Page 27]
pt
11.5.2. Measurement
C
ro 1. Select "Measurement" and confirm with OK (8).
2. The following settings can be configured:
Unit
sv
Threshold
sk
Evaluation time
sl
Buzzer
Back to Menu navigation [} Page 27]
es
11.5.3. System
C
cs
1. Select "System" and confirm with OK (8).
2. The following settings can be configured:
Language
hu
Factory setting
30
Set screen brightness in percent.
Set inactive time until torque tester switches off. Can be deactivated.
Set inactive time until display switches off. Can be deactivated.
Set the time in the format 12 h/24 h.
Set the date in the format DD.MM.YYYY.
Set time.
Activate or deactivate the input of date and time on starting.
Set the measurement unit for torque measurement. This unit
will act as the default unit when a test case is created.
Value in percent before the lower target value that, when
reached, triggers the buzzer to first alert the user acoustic-
ally.
Time after a test case until the value of the applied torque
has been evaluated and can be saved.
Activate or deactivate the acoustic signal.
Set system language.
Reset to factory settings. All data and settings will be deleted.