Descargar Imprimir esta página

PROMAT 4000821885 Manual De Instrucciones Original página 31

Carraca híbrida eléctrica

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
Operation
c) Disconnect battery pack from tool or place the switch in the locked
position before making any adjustments, change accessories, or storing the
tool. Such preventive safety measures reduce the risk of starting the tool
accidentally.
d) Store idle power tool out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tool is dangerous in the hands of untrained users.
e) Maintain power tool and accessories. Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may affect
the power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tool.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
i) When using power tool with Lithium-ion batteries, usage must halt and the
batteries charged immediately when LED indicator light shows continuous
red (low voltage protection). This is in order to prevent damage and ensure
product lifespan.
j) Clean the tool regularly with a dry cloth. Do not use oil, gasoline, paint thinner,
water, metal, water chemicals, flammable materials or other corrosive liquid, all of
which may damage the tool.
5) Battery tool use and care:
a) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of BATTERY pack may create a risk of fire when used
with another BATTERY pack.
b) Use power tool only with specifically designated BATTERY packs. Use of
any other BATTERY packs may create a risk of injury and Fire.
27

Publicidad

loading