Descargar Imprimir esta página

Makita DFL300F Manual De Instrucciones página 9

Atornillador angular inalámbrico
Ocultar thumbs Ver también para DFL300F:

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
Hold the tool firmly and place the socket over the bolt
or nut. Then switch the tool on. When the clutch cuts
in, the motor will stop automatically. Then release the
switch trigger.
NOTE:
Hold the tool with its square drive pointed
straight at the bolt or nut, or the bolt or nut will
be damaged.
Limits of fastening capacity
Use the tool within the limits of fastening capacity. If you
use the tool beyond the limits, the clutch does not work.
And the tool cannot deliver enough fastening torque.
DFL300F
Range of fastening capacity
360
300
240
180
120
60
0
16
(142)
Torque
DFL400F
Range of fastening capacity
360
300
240
180
120
60
0
25
(221)
Torque
NOTE:
The revolution angle means the angle which
a screw/bolt revolves when the tool attains to
100% from 50% of desired torque.
Use of a low temperature conditioned battery
cartridge may sometimes give warning for
battery cartridge capacity by warning lamp and
beeper which makes the tool stop immediately.
In this case, the range of fastening capacity may
be inferior to those shown in the above even if a
charged battery cartridge is used.
30
(266)
.
.
N m (in lbs)
40
(354)
.
.
N m (in lbs)
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
Makita genuine battery and charger
Automatic refreshing adapter
Protector (Yellow,Blue,Red,Clear)
Adjust grip
Switch lever set
Spindle complete 12.7
Anti kickback attachment
NOTE:
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
9 ENGLISH

Publicidad

loading

Este manual también es adecuado para:

Dfl400f