Ryobi Pi1824QBT Manual Del Operador página 8

UNPACKING
This product requires assembly.
„ Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
„ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Cooler
Screws (2)
Washers (2)
Lock Washers (2)
Wheels (2)
Wheel Caps (2)
AC Adaptor
DC Adaptor
Operator's Manual
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
TOOLS NEEDED
See Figure 2.
The following tool (not included or drawn to scale) is needed
for assembly:
„ Phillips screwdriver
INSTALLING THE WHEELS
See Figure 3.
„ Locate the lock washers, washers, screws, wheels, and
wheel caps.
„ Slide the wheel onto the axle.
„ Insert Phillips screw through the lock washer and washer
and into the axle, making sure to tighten securely.
„ Push wheel cap into wheel to cover the screw.
„ Repeat with the second wheel.
6 — English