Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Select a station by:
• Press and hold the TUNING/ALBUM
, or . button on the remote control to
automatically search for active broadcasting
stations.
4.
Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for
a clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5.
If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the ¬ button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a program
number in the PRESET mode.
c. Press the ¬ button to save the preset.
6.
To store any other radio frequencies required,
repeat Steps 3 to 5.
| NOTES |
✎ In Tuner mode
- In the Manual mode, you can use the 1 or
2 button or the DJ JOG control.
- In the Preset mode, you can use the 1 or
2 button or the DJ JOG control on the
product to search a stored radio station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1.
Select FM or AM by pressing the TUNER/
AUX button on the product or remote control.
2.
Press the TUNING MODE button on the
remote control until "PRESET" is displayed.
3.
Press 1 , 2 button on the main unit or
TUNING/ALBUM ,, . on the remote
control to select a preset number.
or
Turn the DJ JOG control left or right on the
main unit to select the stored station.
All manuals and user guides at all-guides.com
Setting the Clock
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1.
2.
3.
4.
Setting the Timer
The timer enables you to set the product to switch
on or off at specific times automatically.
• Before setting the timer, check that the current
• For each step, you have a few seconds to set
• If you no longer want the product to be switched
Example: You want to wake up to
music every morning.
1.
2.
19
English
Timer Function
Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
Press the ¬ button on the remote control.
The hour flashes.
• Increase the hours: TUNING/ALBUM ,
• Decrease the hours: TUNING/ALBUM .
When the correct hour is displayed, press the
¬ button, and then the minutes flash.
• Increase the minutes: TUNING/ALBUM ,
• Decrease the minutes: TUNING/ALBUM .
When the correct minute is displayed, press
the ¬ button, and then "TIMER PLAY SET"
appears in the display.
time is correct.
the required options. If you exceed this time,
you must start again.
on or off automatically, you must cancel the
timer by pressing the TIMER ON/OFF button.
Press the TIMER SET button until TIMER
PLAY SET is displayed.
Press the ¬ button.
Result: ON TIME is displayed for a few
seconds. You can set the timer switch-on
time.
Publicidad
