Publicidad
Idiomas disponibles
Idiomas disponibles
Do not adjust the max pressure limiting
screw !
Max pressure was set by a qualified
mechanic with professional instruments
and the max pressure limiting screw is
sealed with glue to ensure the log splitter
works under pressure no more than 4
tons. Unauthorized adjustment can cause
the hydraulic pump to fail to output
enough splitting pressure or RESULT IN
SERIOUS INJURY AS WELL AS DAMAGE
TO THE MACHINE .
ASSEMBLY
1.
Extention table 1pcs
2.
Left protection guard 1pcs
3.
M6 rotary knob 1pcs
4.
M8 bolt 4pcs
5.
M4 self-tapping screw 5pcs
6.
left support plate 1pcs
7.
right support plate 1pcs
8.
Back protection guard 1pcs
9.
metal buckle 8pcs
10. Right protection guard 1pcs
11.
Top protection guard 1pcs
1. Take out the four plastic pipe sleeves
from the accessory bag, place the plastic
pipes into the corresponding holes on the
left and right plastic support plates, thread
them in with M8x120 bolts, install them
on the corresponding screw hole seats
on both sides of the workbench, and
tighten them with a hexagonal wrench.
2. Install extention table platform onto the
workbench.
3. Insert the left and right protection
guards into the corresponding positions
on the left and right support plates
respectively, and tighten with M14 self-
tapping screws.
46
Publicidad
