Grouw 18721 Manual De Instrucciones página 47

4. Connect the back protection guard to
the right protection guard using the metal
buckles.
Steps: a. Thread the M5 bolt into hole, as
shown.
Then thread the assembled M5
bolts into the hole connecting the
back and right protection guards.
b. Reverse the small connecting buckle
onto the big connecting buckle, and
thread it through the M5 bolt as shown.
c. Finally, tighten the M5 nut and M5 bolt
as shown.
5. Connect the top protection guard
with the back protection guard,
left protection guard,and right
protection guard using metal buckles.
Finishing above steps, a complete
machine is assembled. If you choose
a machine without extra legs or stand,
please place the machine safely on a
workbench with 850mm above the
ground before using .
47
GB