Garland BEST 521 DG Manual De Instrucciones página 32

English
3. WARNING SYMBOLS
Warning labels indicate required information for the
use of the machine.
Warning and care.
Do not let people enter in the work area.
This area will be of a diameter of 15
meters from the point in which you are
working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Maximun speed of gear
XXXX min
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
-1 .
Sense of rotation.
-1
XXXX min . XXXX min
4. MACHINE SYMBOLS
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
Open = Normal operating position.
Located in the top of the filter.
Open = Normal operating position.
Located in the top of the filter.
Position for starting the machine in cold.
Located on the of air filter cover.
Position for starting the machine in cold.
Located on the of air filter cover.
Positions start switch:
"O" = Off (The machine don´t work).
"I"= On (The machine is ready to work).
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).
32/144
Maximum tool rotation
speed.
-1
.