Publicidad
Idiomas disponibles
Idiomas disponibles
TIMER ON
AM
FULL
DISPLAY
POWER
MODE
FAN
1h
SWING
SET/C
+
|
{
(The heat mode symbol
models AY-X08CR/AY-X10CR/AY-X13CR)
{
|
COMBINED USE OF ON AND OFF TIMERS
You can use the ON and OFF timers in combination.
AM
PM
NOTES:
• You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at
different temperatures or other settings.
• Either timer can be programmed to activate prior the other.
1
Press the TIMER ON (
2
The TIMER ON indicator will blink; press the TIME
ADVANCE or REVERSE buttons to set the de-
sired time. (The time can be set in 10-minute
increments.)
3
Point the remote control at the signal receiver
window on the unit and press the TIMER SET
(SET/C) button.
• The orange TIMER lamp (
light.
• The unit will generate a beep when it receives
the signal.
3
4
Select the operation condition.
1
• The unit will turn on prior to the set time to allow
the room to reach the desired temperature by
2
-
the programmed time. (Awaking function)
is provided only on
Example:
To stop operation at 11:00 p.m. and resume operation
(With the same mode and temperature settings) to
bring the room temperature to the desired level by
7:00 a.m.
1
Set the TIMER OFF to 11:00 p.m. during opera-
tion.
2
Set the TIMER ON to 7:00 a.m.
The arrow (
indicator and the TIMER OFF indicator shows which
timer will activate first.
or
) between the TIMER ON
E-13
) button.
) on the unit will
Publicidad
