Sharp AY-X08CR Manual De Instrucciones página 16

AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Lift the front panel of the indoor unit and press the AUX.
button on the operation panel.
• The red OPERATION lamp (
the unit will start operating in the AUTO mode.
• The fan speed and temperature setting are set to AUTO.
TO TURN OFF
Press the AUX. button on the operation panel again.
• The red OPERATION lamp (
NOTE:
If the AUX. button is pressed during normal operation, the
unit will turn off.
POWER SELECTOR
When installing the air-conditioner to a residence with small
electrical current capacity, switch the POWER SELECTOR to
"L". The air conditioner will operate with reduced power, and
the circuit breaker tripping or fuse blowing caused by excess
power consumption can be avoided.
• COOLING or HEATING (for model AY-X13CR) capacity
will be reduced when operating at "L" setting.
• Consult your dealer or qualified technician if continuous
breaker tripping or fuse blowing is experienced even by
switching to "L" setting.
Maximum ampere
at "H" setting
Maximum ampere
at "L" setting
OPTION KIT
Air Purifying Filter
During operation of the air conditioner, the air purifying filter
removes dust and tobacco smoke from the air and discharges
clean air.
The apatite antibacterial material used in the air purifying filter
suppresses activities of adsorbed viruses and other germs.
The replacement period for the disposable type is approximately
3~6 months.
Contact your dealer for the purchase of this option.
) on the unit will light and
) on the unit will turn off.
(only for models AY-X13CR/AH-X13CR)
AH-X13CR AY-X13CR
9A
7A
E-14
12A
8A
AUX.
H
L
AUX.
Type AZ-F900B