Sylvania LD320SS8 A Manual Del Usuario página 22

O
PTIONAL SETTING
Closed Caption
You can view closed captioning (cc) for TV programs, movies and news.
Closed caption refer to text of dialogue or descriptions displayed on-screen
for the hearing impaired.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DETAIL", then press
[ENTER].
3
Use [Cursor K / L] to select "Closed Caption", then
press [ENTER].
4
Use [Cursor K / L] to select "Conventional CC", then
press [ENTER].
5
Use [Cursor K / L] to select the desired closed caption,
then press [ENTER].
[Caption Mode]
CC1 and Text1;
are the primary caption and text services.
The captioning or text is displayed in the same
language as the program's dialogue
(up to 4 lines of script on the TV screen, where it
does not obstruct relevant parts of the picture).
CC3 and Text3;
serve as the preferred data channels.
The captioning or text is often a secondary language.
22
EN
6
Detail
Detail
Closed Caption
V–chip
PC Settings
HDMI1 Audio Auto
Blue LED Power on
Closed Caption Closed Caption
Conventional CC
Off
DTV CC Off
CC Style
Closed Caption
Closed Caption
Conventional CC Off
DTV CC CC1
CC Style CC2
CC3
CC4
Text1
Text2
Text3
Text4
CC2, CC4, Text2 and Text4;
are rarely available and broadcasters use them only
in special conditions, such as when "CC1" and "CC3"
or "Text1" and "Text3" are not available.
• There are 3 display modes according to programs:
Paint-on mode:
Displays input characters on the TV screen
immediately.
Pop-on mode:
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode:
Displays the characters continuously by scrolling
(max. 4 lines).
Press [SETUP] to exit.
Note:
• To show the closed caption on your TV screen, broadcast
signal must contain the closed caption data.
• Not all TV programs and commercials have the closed
caption or all types of the closed caption.
• Captions and texts may not match the TV voice exactly.
• Changing channels may delay the closed caption for a few
seconds.
• Adjusting or muting the volume may delay the closed
caption for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
action. This is not a problem with the unit.
• The caption or text characters will not be displayed while
the main menu or functions display is shown.
• If a black box appears on the TV screen, this means that
the closed caption is set to TEXT mode. To clear the box,
select "CC1", "CC2", "CC3", "CC4" or "Off".
• If the unit receives poor quality television signals, the
captions may contain errors, or there might be no captions
at all. Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
• The unit retains the closed caption setting if the power
fails.
• Closed caption will not be displayed when you are using
an HDMI connection.
• When the unit receives a special effects playback signal
(i.e., Search, Slow and Still) from a VCR's video output
channel (CH3 or CH4), the unit may not display the correct
caption or text.