Trevi XF 470 KB Guia Del Usuario página 15

TF CARD/ USB
1. Insert a Micro SD card into the slot(9) or a USB stick into the socket(8) and
switch On the device;
2. Playback will start automatically. Otherwise, press the MODE button(1) several
times until the USB or SD appears on the display;
3. Press PREV button(7) to go to the previous track, press the NEXT button(5)
once to skip to the next track;
4. Press the PLAY(6) button to pause, press it again to resume playback;
5. Press and hold PREV button(7) or NEXT button(5) to fast forward or rewind
in listening to the track, release the key to return to normal listening;
6. Using the RPT button(20) it is possible to activate the track repeat function
(ONE = repeats the single track, ALL = repeats all the tracks present);
7. Use the number buttons on the remote control(18) to select the track number.
AUX INPUT MODE
1. Connect a 3.5mm audio cable to the unit's AUX input(10);
2. Press MODE button(1) to switch to auxiliary input mode ("LINE" on display);
3. Use the controls of the connected device to select and play the audio.
DISCO-LIGHT
To change the Disco-Light effects, press the LED button(3) several times, the various
lighting effects will be distinguished on the display with: To vary the Disco-Light
effects, press the LED button(3) several times, the various light effects will be
distinguished on the display with: Led1, Led2, Led3, Led4.
Press and hold the LED button(3) for a few seconds to completely deactivate the
front and keyboard LED lighting; press it to reactivate the illumination.
USE OF THE MICROPHONE
1. Plug the supplied microphone into the MIC(11) socket;
2. Adjust the volume, the ECHO effect and the microphone delay using the
Volume knob(4).
15