Kärcher IB 15/120 Manual Del Usuario página 7

Display
1 Indicator lamp - control voltage
green: Control voltage OK
red: Control voltage too low
yellow: Emptying of dry ice contain-
er active
2 Indicator lamp emergency STOP
red: Emergency stop button activat-
ed
green: Emergency stop button not
activated
3 Indicator lamp - compressed air
green: Pressure OK
orange: selected jet pressure not
reached
red: Pressure too low (below 0.15
MPa/1.5 bar)
4 Indicator lamp – dosing device
green: Drive OK
red: Error in drive
5 Indicator lamp - jet pistol
green: Jet pistol OK
orange: The trigger of the jet pistol
was activated during the switch-on
process
red: Jet pistol disconnected or con-
trol line damaged
6 Display field
Jet equipment
Jet gun
1 Nozzle
2 Jet pistol
3 Coupling spray agent hose
4 Coupling of the control cable
5 Safety lever
6 Trigger
7 Operating type switch
Position "1": Compressed air jet
Position "2": Dry ice jet (com-
pressed air and dry ice pellets)
Jet pistol Advanced (option)
1 Nozzle
2 Jet pistol
3 Trigger
4 Safety button
5 Coupling spray agent hose
6 Coupling of the control cable
7 Key for the dry ice dosing on/off
Illuminates red when the dry ice
dosaging is switched off
8 Increase the dry ice dosing
9 Key "increase jet pressure"
10 Key "decrease jet pressure"
11 Decrease the dry ice dosing
5
-
EN
Case for accessories
The case serves the storage of the
nozzles and the associated tools.
1 Lock
2 Carrying handle
3 Unlocking
Opening the case
Open locks.

Swivel the lid downwards.

CAUTION
Risk of damage, do not place heavy
objects on the opened lid.
Separating the case from the
appliance.
Push the unlocking devices and re-

move the case.
Attaching the case to the appliance.
Turn the case so that the closures

are pointing upwards.
Place one side of the case on the

holder and lock it place.
Press the case against the appli-

ance and lock the opposite holder
in place.
Start up
DANGER
Risk of injury on account of flying dry
ice pellets.
While preparing the appliance, check
and ensure that all components, espe-
cially the spray agent hose are in prop-
er condition. Replace damaged com-
ponents with defect-free ones.
Clean dirty components and ensure that
they are in proper working condition.
Place the machine on a horizontal,

even surface and block the parking
brakes of the steering rollers.
Note:
The spray agent hose can be covered
with a protective hose to protect it
against wear and soiling. If necessary,
push the protective hose over the
spray hose prior to connecting it.
Connect the spray agent hose to

the machine and secure it.
Connect the jet pistol to the spray

agent hose and secure it.
Connect the control cable to the ap-

pliance.
Connect the control cable to the ap-

pliance.
7