Bus Coupler; 8X Input Modules, Rmv04-8Di_M8 And Rmv04-8Di_M12; 8X Output Modules, Rmv04-8Do_M8 And Rmv04-8Do_M12; Spare Parts And Accessories - Aventics RMV04-8DI M8 Instrucciones De Servicio

AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC

10.2 Bus coupler

Electrical
Logic operating voltage U
L
Load operating voltage
U , U
Q1 Q2
10.3 8x input modules, RMV04-8DI_M8 and
RMV04-8DI_M12
Electrical
Inputs DIN EN 61131-2
Total current of 24 V sensor supply for all input modules limited to 0.7 A.
Input delay 0 – 1
Input delay 1 – 0
10.4 8x output modules, RMV04-8DO_M8 and
RMV04-8DO_M12
Electrics
Outputs DIN EN 61131-2
Output voltage
Output current
Overload protection
Line length for M8
and M12 connection
Power supply
U and U
Q1 Q2

11 Spare parts and accessories

Bus coupler with field bus protocol EtherNet/IP™
Accessories
M12x1 protective cap
2)
End plate for bus coupler
1)
Delivery incl. 2 tie rods, seal and manual
2)
Delivery incl. 2 mounting screws and 1 seal
Spare parts and accessories
Protective extra-low voltage (SELV/PELV)
according to EC 364-4-41,
8 digital inputs, type 3,
two-wire proximity switch with a quiescent
current of max. 2.5 mA can be connected
H signal voltage drop ≤ 1.5 V
For thermal reasons, the outputs may not be
loaded with anything above the nominal current
Switches off at 0.6 to 1.2 A
Autom. start-up when load is reduced
1)
75
24 V DC (+20%/–15%)
24 V DC (±10%),
residual ripple 0.5%
3 ms
3 ms
8 digital outputs
Nominal value 24 V
Nominal value 0.5 A
for long periods.
Max. 30 m
Nominal value 24 V
(+20 %/-15 %)
Order number
R412012755
R419800769
R412003490