Publicidad
Idiomas disponibles
Idiomas disponibles
3.
INSTALLATION
ATTENTION! For proper operation of the Gesture commands, do not install the device in places
where it may be exposed to direct sunlight, as the IR detector is sensitive to light.
• Install the flush-mounting box Mod. 503 or the flush-mounting box Ø 60 at the height indicated in the
following drawing.
The flush-mounting box Mod. 503 can be horizontally or vertically installed.
• Fix the bracket to the mounting box as indicated.
• Program the dip-switches and connect the system wires to the terminal boards.
• Fix the door phone to the bracket.
• Remove the protective film from the display.
• Power on the system.
ATTENTION! Based on the column address configured on the video door phones, there may be a delay in
switching on.
Box Mod. 503
n° 2 M3,5 x 19 mm
provided
2
4
1
Box Ø 60 mm
n° 2 M3,5 x 19 mm
countersunk screws
n° 2 screws and screw
anchors included
DS1760-047B
Publicidad
