Publicidad
Idiomas disponibles
Idiomas disponibles
en
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Fig. $
Refrigerator compartment
The temperature can be set from +2 °C
to +8 °C.
1. Press selection button 13 until
refrigerator compartment display 1 is
activated.
2. Keep pressing +/– buttons 11 until
the required temperature is indicated.
Perishable food should not be stored
above +4 °C.
12
hyperFresh compartment
The temperature can be set from -1°C to
3°C.
1. Press selection button 13 until
hyperFresh 3 display is activated.
2. Keep pressing +/- buttons until the
required temperature is indicated.
Freezer compartment
The temperature can be set from -16°C
to -24°C.
1. Select the freezer compartment using
the °C button.
2. Keep pressing the +/- buttons until the
required temperature is indicated.
Special functions
Fig. $
Fresh mode
Fresh mode gives food an even longer
shelf life.
Switching on:
Press the mode button until the fresh
display appears.
The appliance automatically sets
the following temperatures:
Refrigerator section: + 2°C
■
hyperFresh compartment: 0°C
■
Freezer section: remains unchanged
■
Switching off:
Press the mode button repeatedly until
the fresh display goes off.
Eco mode
Eco mode switches the appliance to
energy-saving operation.
Publicidad
