Publicidad
Idiomas disponibles
Idiomas disponibles
Store the drill bit
1. Magnetic bit holder
2. Drill bit
This tool provides magnetic bit holder on both side of the tool to store drill bits temporarily.
To store the drill bit, put it on directly and it will be sucked onto the bit holder itself.
To remove the drill bit, pull it off directly.
OPERATION
CAUTION:
Always insert the battery cartridge all the way until it locks in place. If not, it may accidentally fall
out of the tool, causing injury to you or someone around you.
Screw driving operation
Bolt fastening operation
1
2
For screw driving, hold the tool firmly and place the
point of the driver bit in the screw head. Apply
forward pressure to the tool to the extent that the
bit will not slip off the screw and turn the tool on to
start operation.
For bolts fastening, hold the tool firmly and place
the socket bolt over the bolt or nut. Turn the tool
on and fasten for the proper fastening time.
The proper fastening torque may differ depending
upon
the kind or size of the bolt, the material of the
workpiece
to be fastened, etc. The relation
between fastening torque and fastening time is
shown in the figures
13
Keep Working
Publicidad
