Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting to the app
WARNING! This device only supports 2.4Ghz Wi-Fi networks. The number of bits in the ssid and
passwords of the router should not exceed 24 digits.
1.
Download and install the app "qnect home" from Apple App Store or Google Play Store on
your mobile device.
2.
Launch the app "qnect home".
3.
Create a new account or log in to your existing account.
4.
Create a location.
5.
Tap "+" to add the device.
Select Security > QN-IPC06 from the list of products.
6.
Optional:
7.
Power on and reset camera (hold for 5 seconds) until the status indicator is flashing quickly
or a prompt tone is heard, and then click "Next".
8.
Confrm the Wi-Fi network and password. Tap Continue and a QR-code will appear.
9.
Hold your phone with a 15 – 20 cm distance in front of the camera.
10. If the camera has detected the QR-code, you will hear a sound.
11. Confirm you heard a beep.
12. Enter the device name.
Note:
The device name will also be used for push notifications.
13. Install the device on your desired location.
Functions in the app
Lighting Control
Turn the light on or off, adjust the brightness.
Two-way Audio
Watch the videos (with sound) captured by the camera.
PIR
Turn on notifications so you get an alert when someone enters the detection zone.
Turn on the light alarm so the light will turn on automatically when someone enters the detection
zone.
EN - 3
After the camera is installed in the bracket, fix it
with screws.
OPTIONAL: The horizontal angle can be
adjusted between 0-120 degrees in the app.
Now turn the power breaker back on.
Insert a memory card into the memory card slot.
Publicidad
