Descargar Imprimir esta página

Haier HCR6250AGS Manual Del Usuario página 24

Ocultar thumbs Ver también para HCR6250AGS:

Publicidad

Idiomas disponibles

Idiomas disponibles

Cooking
Using incorrect
results are
cookware
not what
The control knob is
expected
not set to the proper
heat level.
OVEN
PROBLEM
Oven is not
heating
Oven is not
cooking evenly
Oven display
stays Off.
Cooling fan
continues to
run after oven
is turned off
Oven light is
not working
properly
Oven light
stays on
Cannot remove
lens cover
Clock and timer
are not working
properly
Excessive
Moisture
Porcelain Chips
FOR MORE HELP, VISIT HAIERAMERICA.COM OR CALL THE
CONSUMER HELP LINE AT 1-877-337-3639.
22
See the "Cookware" section.
See the "Controls" section.
POSSIBLE CAUSE
No power to the
oven
Oven control not
turned on
Not using the correct
bake ware or oven
rack position
Power interruption
The electronic
components have
not yet cooled
sufficiently
Light bulb loose or
burned-out.
Door is not closing
completely
Soil build-up around
the lens cover.
No power to the
oven
Porcelain interior
is bumped by oven
racks
SOLUTION
Reset the circuit breaker or replace the
fuse in the electrical box to your oven.
Make sure the oven temperature has
been selected.
Refer to cook charts for recommended
rack position. Always reduce recipe
temperature by 25 °F (15 °C) when
baking with Convention Bake mode.
Turn off power at the main power
supply (fuse or breaker box). Turn
breaker back on. If condition persists,
call for service.
The fan will turn off automatically
when the electronic components have
cooled sufficiently.
Reinsert or replace the light bulb.
Touching the bulb with fingers may
cause the bulb to burn out.
Check for obstruction in oven door.
Check to see if hinge is bent or door
switch broken.
Wipe lens cover area with a clean, dry
towel prior to attempting to remove
the lens cover.
Reset the circuit breaker or replace the
fuse in the electrical box to your oven.
When using bake mode, preheat
the oven first. Convection Bake and
Convection Roast will eliminate any
moisture in the oven.
When removing and replacing oven
racks, always tilt racks upward and do
not force them to avoid chipping the
porcelain.

Publicidad

loading

Este manual también es adecuado para:

Hcr2250ags