Publicidad
Idiomas disponibles
Idiomas disponibles
For example: If cooking time takes 45 minutes and you want to finish cooking at
6:00.
1. Press the function button repeatedly until the bar above Cook Time flashes and
set the cooking time 45 minutes.
2. Press the function button repeatedly until the bar above End Time flashes and
set the finish time to 6:00.
After the above setting, the current time is displayed and the bars above Cook Time
and End Time will flash indicating that the automatic cooking feature is set. When
the clock displays 5:15, the oven will start cooking automatically, and the Cook Time
bar will flash.
COOKTOP USE
Read the instructions before installing or using this appliance.
1. This appliance shall be installed in accordance with the regulations in force and
only used in a well-ventilated space.
2. The use of a gas-cooking appliance results in the production of heat and
moisture in the room in which it is installed. Ensure that the kitchen is well
ventilated: keep natural ventilation holes open or install a mechanical ventilation
device (mechanical extractor hood).
3. Prolonged intensive use of the appliance may call for additional ventilation,
for example opening of a window, or more effective ventilation, for example
increasing the level of mechanical ventilation where present.
IGNITION AND OPERATION OF THE BURNERS
In order to ignite a burner, push down on the knob while rotating it counterclockwise,
until the knob indicator is aligned with the ignite icon .
For models with a safety valve - Once the flame is lit, hold the knob depressed
for about 3-4 seconds until the device keeps the burner automatically lit. If the
burner fails to ignite, wait one minute for the gas to dissipate before attempting to
reignite. Adjust the flame intensity by rotating the knob counterclockwise from MAX
(maximum) to MIN (minimum).
To turn off the burner, rotate the knob clockwise until the indicator on the knob is
aligned with OFF.
POWER FAILURE
In case of prolonged power failure, the surface burners can be lit manually. Hold a lit
match near a burner and turn knob counterclockwise until the indicator is aligned
with MAX. After the burner is lit, turn knob to desired setting.
In the case of unintentional flame extinguishing, the safety valve intervenes by
shutting off the gas to the burners.
The electric igniter must not be actuated for longer than 15 seconds. Should the
burner not light, or should the burner be unintentionally turned off, immediately
close the burner, and wait at least 1 minute before repeating. Once ignited, adjust
the flame as desired.
12
Publicidad
