Descargar Imprimir esta página

Samsung NX60 61 S Serie Manual Del Usuario página 80

Estufa de pie de gas
Ocultar thumbs Ver también para NX60 61 S Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Gas oven
Function
"Alexa"
Temp Control
• Set oven[Device name] to 300
degrees [Temp].
Oven Timer
• Set oven[Device name] to 3
(Cook Time)
hours[Time].
• Add 10 minutes/hours[Time]
to the oven[Device name].
NOTE
On/Off spec of smart control is same as guided in SmartThings app.
32 English
"Ok Google"
• Set oven[Device name] to 300
degrees [Temp].
• Set oven[Device name] to 3
hours[Time].
• Add 10 minutes/hours[Time]
to the oven[Device name].
Maintenance
Cleaning
CAUTION
Wear the glove during cleaning.
Control panel
First, lock the control panel and the door to prevent accidental operations and/or
product tipping.
1. Press and hold
for 3 seconds to lock both the control panel and the door.
2. Clean the control panel using a soft cloth dampened with plain water, warm
soapy water, or glass cleaner. Do not spray cleansers directly onto the control
panel.
3. When done, press and hold
again for 3 seconds.
WARNING
• Make sure the control panel turns off and all surfaces of the range are cool
before cleaning. Otherwise, you can get burned.
• If the range has been moved away from the wall, make sure the Anti-Tip device
is reinstalled properly when the range has been put into place again. Otherwise,
the range may tip over, causing physical injuries.
• Do not use steel-wool or abrasive cleansers of any kind. These can scratch or
damage the surface.
Stainless steel surface
1. Remove any spills, spots, and grease stains using a soft, wet cloth.
2. Apply an approved stainless steel cleanser to a cloth or paper towel.
3. Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
4. When done, dry the surface using a soft, dry cloth.
5. Repeat steps 2 through 4 as many times as necessary.
CAUTION
• Do not use a steel-wool pad or abrasive cleanser on stainless steel surfaces. It
will scratch the surface.
• Do not spray any type of cleanser into the manifold holes. The ignition system is
located in those holes and must be kept free of moisture.

Publicidad

loading