Gude GNS 150/200-25 Traducción Del Manual Original página 25

Technical Data
Grinding/sharpening machine combination
Art. No
Service connection
Motor power
No-load speed
Degree of protection
Engine shaft diameter
Dimensions abrasive wheel K 80
Dimensions abrasive wheel K 36
Cable length
Dimensions L x W x H Grinding/sharpening machine combination
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 62841; Uncertainty K = 3 dB (A)
Wear ear protectors!
The values stated are emission values and as such do not necessarily constitute values which are safe for
the workplace. Although there is a correlation between emission levels and environmental impact levels,
whether further precautions are necessary cannot be derived from this. Factors in uencing the actually
present environmental impact level in the workplace include the characteristics of the work area and
other noise sources, i.e. the number of machines and other neighbouring work processes. The permitted
workplace values can likewise vary from country to country. This information is intended to assist the user
in estimating hazards and risks.
WARNING
The noise emission level given in this information sheet has been measured in accordance with a
standardized test given in EN 62841 and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared noise emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, noise emission may differ. This
may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to noise should also take into account the times when the tool
is switched off or when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of noise such as: maintain the
tool and the accessories and organization of work patterns.
Exposure to noise can cause hearing loss.
Read and understand the operating instructions before using the appliance. Familiarise
with the control elements and how to use the appliance properly. Abide by all the safety
measures stated in the service manual. Act responsibly toward third parties. The operator is
responsible for accidents or risks to third parties.The operator is responsible for accidents or risks to third
parties.
Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order
to reach knowledge under supervision of the trainer during occupational education.
In case of any doubts about connection and operation refer please to our customer center
ENGLISH
GNS 150/200-25
55238
230 V~50 Hz
250 W
2950 min
-1
IP 43
12,7 mm
200 x 40 x 20 mm
150 x 20x12,7 mm
1300 mm
425 x 280 x 225 mm
8,8 kg
80,7 dB (A)
91,7 dB (A)
21