Automatic Mode; Cooling Mode; Dehumidification Mode; Heating Mode - MAXA 3500 W Manual Usuario/Instalador

1.5 Rapid operating guide

1.5.1 Automatic mode

When the automatic programme AUTO is selected, the unit may operate in COOLING or HEATING mode depending on
the temperature difference in place between the ambient temperature and the temperature selected on the remote
control.
TA = ambient temperature, TS = selected temperature

1.5.2 Cooling mode

To set the cooling mode COOL, proceed as follows:
• select COOL mode by pressing the MODE key (1);
• adjust the desired temperature by pressing the TEMP keys (2). The display shows values from 17°C to 30°C;
• adjust fan speed by pressing FAN SPEED key (3), choosing between AUTO and other speeds HIGH-MED-LOW;
• point the remote control at the unit receiver and press the ON/OFF key ON/OFF (4);
• adjust the air flow in keeping with requirements by using the SWING key (5) or AIR DIRECTION key (6). Once these
adjustments have been made, they will be offered when the unit is switched back on. If received by the unit, every signal
transmitted by the remote control is confirmed by a "beep".

1.5.3 Dehumidification mode

To set the dehumidification mode DRY, proceed as follows:
• select the dehumidification programme by pressing the MODE key (1);
• adjust the desired temperature by pressing the TEMP keys (2). The display shows values from 17 °C to 30 °C;
• point the remote control at the unit receiver and press the ON/OFF key ON/OFF (4);
• adjust the air flow in keeping with requirements by using the SWING key (5) or AIR DIRECTION key (6); Once these
adjustments have been made, they will be offered when the unit is switched back on. If received by the unit, every signal
transmitted by the remote control is confirmed by a "beep". When the dehumidification programme DRY is selected, the
unit operates with a free temperature setting, progressively lowering the ambient temperature and humidity. When the
dehumidification programme DRY is in operation, the FAN SPEED button cannot be used.

1.5.4 Heating mode

To set the heating mode HEAT, proceed as follows:
• Select the heating programme by pressing the MODE key (1);
• Adjust the desired temperature by pressing the TEMP keys (2). The display shows values from 17°C to 30°C;
AUTO
COOL
DRY
HEAT
1
5
DIRECTION
6
The unit will operate in mode
Cooling
Fan
Heating
SETTING TEMP ( °C )
FAN
HIGH
MED
LOW
TEMP
2
4
ON/OFF
MODE
FAN SPEED
3
SWING ECONOMY TIMER ON
TIMER OFF
SWING
RESET LOCK
AIR
Condition
TA - TS > 1°C
-1°C ≤ TA - TS ≤ 1°C
TA - TS < -1°C
44