Publicidad
Idiomas disponibles
Idiomas disponibles
LET'S PLAY
First Time Pairing
Press and hold the multi-function button
'Power On' followed by 'Pairing'.
Important: the headphones will not enter pairing mode unless you keep the
multifunction button
Go to the Bluetooth settings on your audio device to select 'StreamQ C4' from
the list.
Once paired with your device, you will hear 'Connected'.
Play / Pause
Short press Call / Play / Pause Button
Volume Up / Down
Short press the Volume Up / Down Buttons
Skip / Previous Track
Press and hold the Skip / Previous Track Buttons
Active Noise Cancellation (ANC) On / Off and Transparent Mode
Short press the ANC button
TRANSPARENT MODE > ANC ON > ANC OFF.
You will hear a voice announcement telling you which mode you are in:
'Transparent On', 'ANC On' or 'ANC Off'. The ANC LED light
WHITE while either Transparent mode or ANC mode is being used.
Change the Preset Equalisation (EQ) Settings
Choose from 3 Equalisation (EQ) modes to suit your personal preference. There
is no App required.
• Bass boost mode increases the bass sound.
• Voice mode decreases the bass, the high-frequency tones and increases the
speech frequencies.
• Music mode returns you to the optimal EQ for music listening.
Triple press the Multi-function button
Boost and Voice modes.
Answer / End a call
Short press the Call Button
(Audio is picked up via the microphones
Power On / Off
Press and hold the multi-function button
EN
pressed until you hear 'Pairing'.
6
[6]
[5]
11
to cycle through the following modes:
[6]
6
[6]
6
until the headphone says
6
4
5
[4]
/
[5]
to adjust the volume
4
[4]
/
[5]
6
to cycle through the Music, Bass
10
.)
6
[6]
on / off. You will hear 'Power
3
5
to change tracks
[12]
will glow
12
on / off'.
Publicidad
