Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
7 OPERATION
7.1 Home screen
After connecting the power supply, the appliance initializes itself and, after a brief wait, the LED display
shows the home screen.
Menu items on the home screen
(1)
Main menu
22/02/2022 21:11:32
(2)
Settings
(3)
Service menu
(4)
Device information
(5)
Display current volume flow
(6)
Status display protection
(7)
Registered user
(8)
UV-C lamp active
(9)
Automatic mode active
Fig. 7: Home screen
Tapping a menu item in the LED touch display takes you to the corresponding menu. The selected
menu item then appears as a green symbol. The home screen also shows the current volume flow of
the appliance. The appliance is switched off at a volume flow of "0 m³/h".
NOTE
The display automatically turns off after 10 minutes without use. It can be reactivated
by tapping the black screen.
18 – EN
7
8 9
Benutzer 01
AUTO
UV
1
2
5
6
3
0 m
3
/h
i
4
7.2 Description of the controls
The LED display offers various controls of the following features:
Symbol
Meaning
Feature switched off.
Tap to switch the feature on.
Feature switched on.
0
1250 m
/h
2500
3
Tap to switch the feature off.
0
1250 m
/h
2500
3
0
1000 m
3
/h
1750
0
1250 m
/h
2500
Tap and slide the controller to set the feature
3
to the desired value.
0
1250 m
3
/h
2500
Tap to open the screen with the advanced settings.
Tap to return to the settings.
These elements are used to adjust the settings in the active menu items. Furthermore, there are some
special control elements for particular settings, which are explained in the corresponding description.
7.3 PIN-Code**
NOTE
Two user accounts are stored in the device by default - „User 01" and „User 02".
„User 01" has admin rights and can therefore access all functions and change or
deactivate the PIN codes for both users. „User 02" only has the right to access
the main switch and can therefore only switch the device on and off.
** Applies to models with PIN code protection
Operation
EN – 19
Publicidad
