Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Menu
Button
New password
Confirm
New password
*
Password comparison
%
×
Confirm new password
Confirm
Access denied
Password protected!
Access denied!
** Applies to models with PIN code protection
22 – EN
Action
If the entered PIN code was correct, tap the
"Confirm" button to set the new PIN code.
Tap on the upper "New Password" input field.
A numeric keypad opens.
Enter the new PIN code and confirm your entry
with the "Enter" key on the numeric keypad.
Tap on the lower "New Password" input field.
A numeric keypad opens.
Enter the new PIN code and confirm your entry
with the "Enter" key on the numeric keypad.
Note:
The new PIN code can consist of up to 5 digits of
the numbers 0 – 9.
The PIN codes in the two input fields must match:
– If they match, a green tick appears next to the
input fields.
– If the entries do not match, a red cross appears
next to the fields. In this case, enter the new PIN
code again in both fields.
Accept the new PIN code by tapping the "Confirm"
button.
This takes you back to the "Settings" menu.
In case of the wrong PIN code or an unauthorized
attempt to access the display, the following error
message appears:
Password Protected!
Access Denied!
Confirm this message and enter the correct
PIN code.
7.3.3 Deactivating PIN code display protection**
You can also deactivate the PIN code protection of the display. To do so, switch to the „Settings" menu
on the home screen and then „Advanced settings".
Menu
Button
0
1250 m
/h
2500
3
Settings
Advanced settings
PIN code protection
Security
Password
*
Confirm input
Enter
Login
Confirm
Password protection
0
1250 m
3
/h
2500
Back
0
1250 m
/h
2500
3
0
1250 m
/h
2500
3
Back
** Applies to models with PIN code protection
7.4 Starting the appliance
Menu
Button
Settings
System OFF / ON
0
1250 m
/h
2500
3
Operation
Action
On the display, tap the arrow to go to the
"Advanced settings" view
Tapping the „Security" icon opens the menu for the
PIN code settings. To access this menu, the PIN
code must be confirmed.
Tap on the "Password" input field. A numeric
keypad opens.
Use it to enter the PIN code.
The default PIN code is 11111.
Confirm the entry with the "Enter" key on the
numeric keypad.
After entering the PIN code, tap the „Confirm" key.
The menu for the PIN code settings is unlocked.
By tapping the „Password protection" button, you
can switch the PIN code query off or on.
The appliance immediately accepts your entries.
The "Back" button takes you back to the "Advanced
settings" menu.
The "Back" button takes you back to the "Settings"
menu.
Action
Start the appliance by tapping the
"System OFF / ON" button.
– The button then appears in green.
– The appliance starts.
– Tap again to turn the appliance off.
EN – 23
Publicidad
