Gamma+ Vapor Styler HSKR-S089 Manual De Uso Y Garantía página 12

BEFORE YOU START
Tank filling
Only use demineralised water.
Do not use additives in the tank (perfumes, oils,
aromatic substances, etc.).
Before any filling, check that the straightener is
off.
Open the tank lid [F] and pour demineralised water using the
special container with nozzle supplied. Keep the doser tilted 45°
to prevent water leaking.
SWITCHING ON AND USE
Connect the power cord [H] to the mains socket in accordance
with the safety warnings described previously. Release the
straightener using the special key (G) positioned on the
opposite side of the LCD screen.
Press the [C] key. The straightener will emit a beep to indicate
that it has turned on.
The LCD screen [A] will indicate the preset temperature. Select
the desired temperature using the + and - keys [D]. The LCD
screen [A] will show the real temperature of the heating plates
until the selected temperature is reached.
STEAM function
Press the [B] key to activate the steam function. The steam
symbol will appear on the LCD screen [A].
If the amount of water in the tank is sufficient, a blue LED will be
displayed on the LCD screen [A].
If the tank is empty or if the water runs out
The straightener will emit a sound (beep) to indicate that the
tank is empty and the blue LED on the LCD screen [A] will turn
red. Turn off the straightener and proceed with filling.
At first use, when the set temperature has been
reached and the steam function is activated,
hold the straightener, keeping it closed until
steam comes out. The steam will not come out
when the two clamps of the straightener are
open.
Press the [B] key again to deactivate the steam function.
Proceed with using it according to the type of hair. Refer to the
"Styling tips" to style your hair.
The straightener reaches high temperatures in a
few seconds. Do not touch the heating elements
and do not bring the straightener too close to
your face, ears, neck and skin. RISK OF BURNS.
SWITCH-OFF
Press and hold the [C] key for about 3 seconds. The word OFF will
be displayed on the LCD screen [A].
Do not pull the power cord or appliance to disconnect the
power cord [H] from the mains socket.
Put the appliance in a safe place and wait as long as necessary
for the straightener to cool completely.
Close the straightener and lock it using the special key [G]
positioned on the opposite side of the LCD screen.
Take care not to wind the power cord around the straightener
when storing it.
12