MAST M.2x Serie Manual De Instrucciones página 32

OPERATION
Canopy installation
To fix the canopy, firstly you need to attach the cano-
py's connectors to the sides of the frame. You'll notice
a round guide on each side; the connectors should be
attached to these guides. Then, attach the fabric of
the rear part to the tube supporting the frame. Even-
tually, connect the canopy's rear zip to the seat's zip.
To fold the canopy: pull the front edge back towards
the handlebar.
To open the canopy: push the front edge forward.
You can further extend the canopy by opening one or
both zips placed in the middle of the canopy.
Leg rest adjustment:
As shown in the picture: Pull the adjusting device
below the leg rest to adjust the angle of the leg rest
up or down.
31
M.2x MAST_manual. D_IT_EN_FR_ES. 15.06.2023.indd 32 M.2x MAST_manual. D_IT_EN_FR_ES. 15.06.2023.indd 32 15.06.2023 11:08:32 15.06.2023 11:08:32