Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
• Regularly clean by hand the product (all wheels, seats, and fixations) with a damp cloth and a mild detergent
and disinfectant. Do not use abrasive products, detergents or solvent-based products.
• Dry with a clean, dry soft cloth.
• The walker must be completely reviewed every year, with compulsory lubrication.
• It is recommended that the device is serviced annually.
• If the device is subject to heavy use and/or use in a multi user environment then we recommend the device is serviced
more frequently.
• In case of malfunction, do not repair the product yourself. Consult an authorised dealer.
• Checklist :
To keep the product in good condition, check before each use, and check regularly as follows :
Check the product
Screws and fasteners
Stability of the frame and backrest
State of the seat and wheels
Brake and folding operation
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry
out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious injury.
•
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near
a radiator) or near a cold source.
•
Keep away from all flames and sources of sparks.
•
Respect the conditions for storing your product :
•
In a dry and temperate place
•
Protect your product from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other
products when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the product elements,
do not jam anything...).
Version Mai 2023
Anytime
Every week
X
X
Every month
X
X
7
Publicidad
