Publicidad
STEP 11
(x49)
#A21110
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL ARE A STRUCTURAL PART OF THIS UNIT
9
AND MUST BE INSTALLED PROPERLY.
Carefully place the cabinet onto its front.
Position Lower Back Panel as shown. Align squarely with outer edges.
Flush bottom edge of Lower Back Panel with bottom edge of Bottom (D)
and nail straight into back edges of Left Panel (A), Right Panel (B)
& Bottom (D).
Position the Upper Back Panel as shown. Align squarely with outer edges.
Flush top edge of the Upper Back Panel with the top edge of the Top (C)
and nail straight into back edges of Left Panel (A), Right Panel (B), Top (C)
& Fixed Shelf (E).
raw surface
UPR
BACK
B
E
LWR
BACK
raw surface
D
19
9
Flush bottom edge of the back
panel with the bottom edge of
bottom (D).
Publicidad
