Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the hydraulics
Attach hydraulic hoses as shown in the diagram.
2
3
Basic hydraulic hose (980 mm)
Used for all body variants
Hydraulic hose (240 mm)
Used in addition to the basic hose for the average adjustment height of the crossbeam
Hydraulic hose (440 mm)
Is used in addition to the basic hose for the highest adjustment height of the crosshead.
Before connection, clean all hoses and connections
Check all threads for damage
Lay the hoses according to your selected installation design (crosshead height)
Tighten the hose connections carefully.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
100
1
Release date: 18.08.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
Publicidad
