Lionelo Braam i-Size Manual De Usuario página 20

desired position. Move the seat slightly until you hear a distinctive "click" sound – the seat
has been secured in the selected position.
The seat has 5 levels of tilt adjustment in rearward and forward facing positions.
Note! Children under 60 cm in height may only use the seat in the reclining position.
Note! Children over 125 cm in height may only use the seat in the upright position.
SEAT ROTATION
The rotation mechanism is a feature that helps to comfortably position or remove the child
from the seat.
Press the seat rotation button (19, fig. B), rotate the seat 90 degrees. With this function you
can easily place and remove your child from the seat. Then rotate the seat to the rearward
or forward facing position. The correct positioning will be signalled by a click.
COVER REMOVAL
To remove the seat cover, follow the steps below:
1.
Pull the headrest adjustment lever (A, fig. 31) and lift the headrest upwards. (B, fig. 31).
2.
Unfasten the 5-point seat belt covers (C, fig. 31) and then put the shoulder belts through
the holes in the backrest (D, fig. 31).
3.
Unfasten the snaps in the fabric and then remove the cover located on the headrest
(fig. 32).
4.
Remove the rubber clips and then remove the cover from the lower part of the seat
(fig. 33).
To reattach the cover to the seat, follow the above steps in reverse order.
CLEANING AND MAINTENANCE
Minor dirt should be cleaned with a damp sponge and a mild detergent.
The cover can be washed at a maximum temperature of 30°C. To do this, the cover must be
unzipped and completely removed from the body of the seat (see: Cover removal).
When drying, do not use dryers. The cover should not be exposed to sunlight for drying. The
plastic parts can be cleaned with a damp cloth and mild detergent.
Note! Do not use strong detergents or bleaching agents.
The photos are for illustrative purposes only, the actual appearance of the products may differ from those
EN
shown in the images.
‑ 20 ‑