Maxi-Cosi Axiss Instrucciones De Uso página 6

(Fig. 5 - 12)
INSTALLING THE CAR SEAT INTO THE CAR: « IN THE
DIRECTION OF TRAVEL »
IMPORTANT: Before you begin using the Maxi-Cosi Axiss,
you should ensure that the spaces have been removed from
the seatbelt guides. These form part of the packaging and
should be removed.
Installing the car seat into the car: « in the direction of
travel ».
1. Place the lap section of the seatbelt behind the two seat
belt guides (a) on the car door side and then around the
underside of the car seat (b).
10
2. Then place the lap section of the seat belt on the other
3. Rotate the seat part towards you by opening the lever
4. Rotate the seat belt tensioner as far as it will go (see
OK
NO
OK
side, behind the two belt guides (a). Fasten the seat belt
(b) and tighten it. IMPORTANT: Ensure that the lap
section of the seat belt is tight and passes through the 4
belt guides around the base . The seat belt should not be
twisted.
(a). Keep the handle open and rotate the seat shell
towards you with your other hand (b). IMPORTANT:
the button under the base should be adjusted to the
desired direction of rotation beforehand (see page 9).
diagram).
OK
NO
NO