Pioneer DFM-909 Manual De Instrucciones página 32

EFFECT FUNCTIONS
Name
22 CHORUS1
23 CHORUS2
24 CHORUS3
25 FLANGER1
26 FLANGER2
27 PHASER1
28 PHASER2
29 TOUCH PHASER
30 TOUCH PHASER2
31 FILTER (LPF)
32 FILTER (HPF)
33 FILTER (BPF)
34 FILTER PAN
35 COMPRESSOR
32 32
<DRB1350> <DRB1350>
En/Fr En
Function
Produces broadened musical effect
resembling the production of same pitch
sounds from multiple sources.
Produces even broader musical effect than
CHORUS1.
Changes degree of waver in chorus sound.
Produce flange effect by adding delayed
sound. In time with BPM, change frequency
band receiving flange effect.
In time with BPM, change frequency band
receiving flange effect, thus producing either
undulating or rotating effect.
Phase effect is produced by adding sound
with delayed phase. The phase-affected
frequency band changes in time with BPM.
Phase-affected frequency band changes in
time with BPM. Phase effect change is
inverted between L and R.
Phase effect is produced in correspondence to
input volume. The higher the input volume, the
higher the frequencies producing the effect.
Phase effect is produced in correspondence to
input volume. The higher the input volume, the
lower the frequencies producing the effect.
Change low-pass filter's cutoff frequency in
time with BPM.
Change high-pass filter's cutoff frequency in
time with BPM.
Change band pass filter's center frequency in
time with BPM.
In time with BPM, bass and treble sounds
pan in opposite directions.
Inputs above the threshold level are
compressed before output.
FX ADJ. Parameter (touch panel)
Set period of chorus wavers based on beats calculated
from BPM.
Set period of chorus wavers based on beats calculated
from BPM.
Set period of chorus waver based on beats calculated
from BPM, and set degree of chorus sound waver.
Set period of flange effect shift based on beats
calculated from BPM.
Set period of flange effect shift based on beats
calculated from BPM.
Set period of phase effect shift based on beats
calculated from BPM.
Set period of phase effect shift based on beats
calculated from BPM.
Set the number of filter stages producing the phase
effect. Greater numbers of stages produce deeper
effects.
Set the number of filter stages producing the phase
effect. Greater numbers of stages produce deeper
effects.
Set period of cutoff frequency shift based on beats
calculated from BPM.
Set period of cutoff frequency shift based on beats
calculated from BPM.
Set period of center frequency shift based on beat
calculated from BPM.
Set period of cutoff frequency shift based on beats
calculated from BPM.
Set degree of compression.