vitapur VWF4 Manual De Uso Y Cuidado página 4

OPERATING INSTRUCTIONS
Lower Chamber Assembly
1. Attach the float into the threaded float base
at the bottom of the lower chamber.
2. Place the assembled lower chamber on the water
dispenser.
Lid Assembly
3. To install the top lid cover ring onto the upper
reservoir, you must first separate, (remove) the lid
cover from the ring. Open the lid cover until the
1.
hinge pivots start to separate from the ring and
twist off.
3. Caution: Do not push lid back forcefully.
4. To install the lid ring onto the upper reservoir, lay the
ring on a solid flat surface with the open channel of
the ring facing upward. Position the upper reservoir
on the top ring making sure both contours are
aligned, and press fit together.
Upper Chamber Assembly
5. You can now place your assembled upper chamber
on top of the lower chamber.
6. Firmly press Universal Replacement Filters into filter
holes in top reservoir. Securely push the filter into
the housing to make a tight seal for effective
filtration.
Manual Filter Change Reminder
4.
7. To use the manual filter change reminder, turn the
dial on the lid until the number in the green circle
coincides with the month that the filter is being
installed. The number that appears in the red circle
will be the month to replace your filter. Repeat above
step for every filter change.
5.
7.