Publicidad
Idiomas disponibles
Idiomas disponibles
Check below spare parts before riding the scooter:
A. checks tire condition such as worn-out or break.
B. checks the transmission system condition.
C. checks tire pressure.
D. check bugle and rear reflector condition.
E. checks all the standard spare parts such as nuts and screws if tighten well. Check if the brake cable lanyard
functions in smooth condition.
F. charging battery when not regular drives the scooter. To prolong the battery life, charging should do in each
15days during summer and 30days during winter.
G. checks all the turning parts frequently such as handle bar. Add lubricant when needed.
H. Checks all the lighting system.
RIDING INSTRUCTION
1. Fold up the kickstand and hold onto the handlebars with both hands. Assume a well-balanced position on the
scooter and push off with your foot.
2. ON the power (turning the key from "
3. Twist the accelerator slowly to avoid a sudden rush of speed forward. The speed of the bike will increase as you
twist the accelerator more. Release the accelerator and apply the brakes to stop your scooter. You will control the
speed of the scooter by using both the accelerator and the brakes. When the brake handle is squeezed it cuts
power to the accelerator.
RIDING POINTS
" to "
") your right hand will control the accelerator.
11
Publicidad
