Tabla de contenido
Publicidad
ESTUDIO DE GRABACIÓN DIGITAL
Modelo: BR-1600CD
1. Receive data
Channel Voice Messages
Note off
Status
2nd byte
8nH
kkH
n = MIDI channel number:
kk= Note number:
vv = Note off velocity:
Note on
Status
2nd byte
9nH
kkH
n = MIDI channel number:
kk= Note number:
vv = Note on velocity:
* Received via drums MIDI channel when the MIDI parameter "Drums Note Ch." is set to
1-16; plays drum sound.
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
plays bass sound.
* Drum sounds correspond to note numbers as follows.
Drum name
Note number
Hi-Q
D#1 (27)
Stick
G 1 (31)
Metronome (click)
A 1 (33)
Metronome (bell)
A#1 (34)
Kick 2
B 1 (35)
Kick 1
C 2 (36)
Snare 1
D 2 (38)
Snare 2
E 2 (40)
Tom 1
F 2 (41)
Closed hi-hat
F#2 (42)
Tom 2
A 2 (45)
Open hi-hat
A#2 (46)
Tom 3
C3 (48)
Crash cymbal
C#3 (49)
Tom 4
D 3 (50)
Ride cymbal
D#3 (51)
Cow bell
G#3 (56)
Claves
D#5 (75)
Control Change
Volume (Controller number 7)
Status
2nd byte
BnH
07H
n = MIDI channel number:
vv = Volume:
* Received via each track's MIDI channel when the MIDI parameter "MIDI Fader SW" is
set to ON; controls the track volume.
Expression (Controller number 11)
Status
2nd byte
BnH
0BH
n = MIDI channel number:
vv = Expression:
* Received via the MIDI channel set for the EXP PEDAL when the MIDI parameter "MIDI
Fader SW" is set to ON; controls the effects in the same manner as operating the EXP
PEDAL.
286
MIDI Implementado
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH(ch.1 - ch.16)
00H - 7FH(0 - 127)
01H - 7FH(1 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - ch.16)
00H - 7FH (0 - 127)
Channel Mode Messages
All Sound OFF (Controller number 120)
Status
2nd byte
BnH
78H
n = MIDI channel number:
* Received via drums MIDI channel when the MIDI parameter "Drums Note Ch." is set to
1-16; mutes the playing drum sounds.
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
mutes the playing drum sounds.
Reset All Controllers (Controller number 121)
Status
2nd byte
BnH
79H
n = MIDI channel number:
* Received via each track's MIDI channel and the MIDI channel set for the EXP PEDAL
when the MIDI parameter "MIDI Fader SW" is set to ON.
* When this message is received, the track volume and EXP PEDAL are reset as shown
below.
Track volume: 100
EXP PEDAL: 127
All Note Off (Controll number 123)
Status
2nd byte
BnH
7BH
n = MIDI channel number:
* Received via bass MIDI channel when the MIDI parameter "Bass Note Ch." is set to 1-16;
turns the playing bass note off.
System Realtime Message
Timing Clock
Status
F8H
* Received during creation of sync tracks in the Sync Track screen.
Start
Status
FAH
* Received when creation of the sync track begins in the Sync Track screen.
Stop
Status
FCH
* Received when creation of the sync track is finished in the Sync Track screen.
Active Sensing
Status
FEH
* When Active Sensing is received, the unit will begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds
approximately 400 ms, the same processing will be carried out as when Reset All
Controllers is received, and message interval monitoring will be halted.
System Exclusive Message
Status
Data byte
F0H
iiH,ddH,......,eeH
F0H:
System Exclusive Message status
ii = ID number:
an ID number (manufacturer ID) to indicate the manufacturer whose
Exclusive message this is. Roland's manufacturer ID is 41H.
ID numbers 7EH and 7FH are extensions of the MIDI standard;
Universal Non-realtime Messages (7EH) and Universal Realtime
Messages (7FH).
dd,...,ee = data:
00H - 7FH (0 - 127)
F7H:
EOX (End Of Exclusive)
Fecha: 1 del 10 de 2003
Versión: 1.00
3rd byte
00H
0H - FH (ch.1 - ch.16)
3rd byte
00H
0H - FH (ch.1 - ch.16 )
3rd byte
00H
0H - FH (ch.1 - ch.16)
Status
F7H
Publicidad
Tabla de contenido
