VBM REPLICA 2B ELETTRONICA Manual De Instrucciones página 90

• PID adjustment
Do not change the value, but leave the factory setting "3°C - 37.4°F"..
• Unit 1 T. Offset
Do not change the value, but leave the factory setting "-5°C - 23°F".
• Filling timeout
Do not change the value, but leave the factory setting "120".
• Water filter
Do not change the value, but leave the factory setting "0".
2
32
To access the technician menu, operate as follows exclusively from the left-hand
3
pushbutton panel:
•
Simultaneously press the button "
set the machine to OFF; the LED (3) will go off and the following will be shown
on the display:
1
•
Press the button "
" (1) and the button "
11.26
OFF
" (1) to scroll through the menu.
" (2) to