VBM REPLICA 2B ELETTRONICA Manual De Instrucciones página 93

12.1,
PREPARING THE MACHINE.
•
Check that the water supply tap upstream of the machine is open.
•
Start the machine by turning the switch (1) to "
•
The water in the boiler will automatically start heating up indicated by the LED
(2) coming on.
•
Wait until the set temperature has been reached indicated by the LED (2) going
off; the pressure indicated on the pressure gauge (3) must be about 1 bar (0.1
MPa).
•
Turn the switch (1) to "
element; the LED (4) will come on.
•
Place the filter holders in the relative units.
•
Position the cups possibly facing up.
W ARNING: Only cups, mugs and glasses and no other objects may
be placed on the cup heating plate.
Dry the objects before placing them on the cup heating plate.
".
" to start operation of the cup heating plate heating
12,
OPERATION.
1
3
2
4
35