motea MOTEA30 Instrucciones De Montaje página 9

Installation - left side
1. Apply thread locker to the screws (2).
2. Install the foot support assembly (1). Use the screws M9 x 40 mm (3/8-16 x 1,62") (2) and tighten them.
3. Install the shifter linkage rod (6) to the rear shifter rod lever (5). Use the button head screw M8 x 25
mm (4) for this purpose.
4. Adjust the shifter rod ends (8) according to your posture and tighten the lock nut (7) accordingly.
5.Insert the plug (3) into the shift shaft bore.
Motea GmbH · Gewerbepark Grünewald 2
58540 Meinerzhagen
8
1
2 2
6
7
9
5 4
3
motea.com/contact
Revision status 001
08/2023