Tv Trouble Shooting - Premier SX-4824TVD Manual De Instrucciones

TV TROUBLE SHOOTING

If there are image and audio problems, it may be cause by unsuitable connection, adjustment or
interference from outside equipment. Please check and refer to the following method.
TROUBLE
No image
No sound
No image and
Sound is normal
Image is good
and no sound
No color,
Sound is good
Image not clear
sound is good
Stripe, interfere
and noise
If you are suffering from following problems, please refer to following methods. If the problem cannot be
solved, please contact service center.
TROUBLE
No sound
Don't play disc
Remote controller
doesn't work
Image distort
Button no use
P-12
REASON
No input power
No input signal
Adjust is improper
Adjust is improper
Adjust is improper
Input signal is weak
High frequency
Pulse interfere
REASON AND SOLUTION
1. Check the player is connected with other equipment, such as
Earphone or TV.
2. Check the TV working in proper operation.
3. Check the system is setup properly.
1. Check the disc is put in the disc tray in proper direction.
2. Check a disc is in the tray.
3. Check the disc is clean.
1. To move away the barrier between remote controller and player.
2. To make the remote controller aim at the receiving window.
3. To check the battery is enough power.
1. Check the disc is scratched or dirty.
2. The player is controlled by microcomputer, please turn off the power when
any problem happened, and restart it after 10 minutes. If there is no any error
signal, it means it can be operated as normal.
Please turn off the power and turn it on after 10 seconds.
1. Check the plug is connected or not.
2. Check the power switch is turned on or off.
3. Check TV signal and TV antenna.
Check the TV system is correct or not.
1. Check whether it is on mute state or the
volume is too slow.
2. Check S-SYS is correct or not.
Check S-COLOR is correct or not.
1. The line of TV signal input or antenna not
connected completely.
2.Adjusting the receiving direction of antenna
Cause by engine, electronic tooling and hair
dryer working. Please keep away from these
interference resources.
SOLUTION