Connections to the heaters are the same for
both types, as are their functions.
The descriptions of these therefore apply to
both versions.
Depending on the connected heating appli-
ance or system, the vrnetDIALOG supports
the following functions
- Remote parameter setting
- Remote diagnosis
- Alarms
Your heating engineer will help you select the
suitable appliance or system.
2.4
Scope of delivery and accessories
2.4.1 vrnetDIALOG 820 (analogue)
- Communication unit with analogue modem
- Connection lead for the boiler with eBUS
(30cm and 2m)
- Connection lead for the boiler with JV/PC
interface (30cm and 2m)
- Connection lead for telephone socket (2 m)
- Green and yellow earth lead
Installation Manual for vrnetDIALOG
All manuals and user guides at all-guides.com
Description of the appliance 2
To set up the communication unit you need a
telephone socket on the analogue telephone
connection (ISDN systems need a terminal
adapter).
The telephone connection must support mul-
tiple frequency dialling.
The telephone connection must allow dialling
of the the number 00 49 180 5 and local
internet providers.
Note
In parallel operation the telephone
rings when the server connects to the
vrnetDIALOG.
2.4.2 vrnetDIALOG 830 (GSM)
- Communication unit with dual-band GSM
modem
- Connection lead for the boiler with eBUS
(30cm and 2m)
- Connection lead for the boiler with JV/PC
interface (30cm and 2m)
- Mobile radio antenna with lead
GB
5