Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL PANEL FEATURES
1. LED DATA CENTER: See LED DATA CENTER
section.
2. 5V DC, USB Outlets: Provides 5 volt DC power
up to 1.5 amps.
3. Circuit Breaker (DC): Protects the generator
against electrical overloads.
4. 12V DC, Outlet (Automotive): Provides 12
volt DC power up to 8.3 amps.
5. 120V AC, 30A Locking (NEMA L5-30R):
This outlet can supply electrical power for
operation of 120 Volt output up to 30 amps.
6. 120V AC, 20A , Single Phase, 60 Hz Outlets
(NEMA 5-20R): Each outlet is capable of carrying a
maximum of 20 Amp on.
NOTE: Total power drawn from all outlets must not exceed the nameplate rating.
12
10
9
11
8
7
6
7. Parallel Operation Outlets: These outlets are used
for connecting two AIPOWER inverter generators
for parallel operation. Do not connect or disconnect
parallel cables while the generator is running to avoid
damage.
8. Ground Terminal: The ground terminal is
used to ground the generator.
9. Circuit Breaker (AC): Protects the generator
against electrical overloads.
10. Low Idle Switch: Low idle switch minimizes fuel
consumption and noise by adjusting the engine speed
to the minimum required for the current load.
11. Starting Dial Switch: Used to start and stop the
generator.
12. Recoil Starter: Pull the recoil starter to manually start
the engine.
Page 09
5
4
1
2
3
Publicidad
