FUNCTIONS
My Zone Chiller Function
Press key A3 repeatedly until indicators J begin to flash; press A4 to confirm the activation of My
Zone Chiller Function. This function can be automatically disabled by choosing the other functions of
My Zone compartment.
Note:
The compartment temperature can be reduced by using the Q‐Cool function or increased by
using the D‐Frost function. Among the three functions of My Zone compartment, one of the
functions must be activated.
Display Control
The display screen will turn off automatically 30 seconds after an operation is finished. It will be lit
up by opening the door or pressing any key. (Alarm does not light up the display screen)
Door Opening Alarm
When the refrigerator door is opened, the fridge interior light and the control panel will illuminate.
After 3 minutes, the door open alarm will sound. The alarm can be silenced by either closing the door
or touching the control panel. If the refrigerator door is left open for more than 7 minutes, the
internal light and control panel illumination will automatically switch off.
Turning off/on the Refrigerator
When the refrigerator is working, if you press key A4 for 5 seconds, the whole refrigerator will be
switched off. The buzzer will begin to beep after pressing key A3 for 5 seconds. The whole
refrigerator will stop to work after the beep.
When the refrigerator is switched off, if you press key A4 for 5 seconds, the relevant indicator
lights up, the refrigerator begins to operate.
Note: The refrigerator needs to be emptied before operating this function; this operation is not
equivalent to turning off the power.
17